EtherTRAK-2 I/O Module-34 Mixed Inputs/Outputs , PoE

​Discrete Input Channels 

• Voltage range : 10 – 30 VDC 
• Input Polarity: Sourcing (apply power to active) or sinking (ground closure) on 8 inputs 
• Guaranteed ON voltage: 9 VDC 
• Guaranteed OFF voltage: 5.0 VDC 
• Guaranteed OFF current: 2 mA DC 
• Input resistance: 10 Kohms 
• Input current (@ 24 VDC) 3 mA 
• Input Protection: High Impedance with overvoltage protection 
• Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate) 
• Fastest response: 1 ms (400 Hz. max. counting rate) 
• Special fast counting rate: Up to 50 KHz on channels 1 and 2 
• Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting 
• Scan rate (all channels) 1 ms

Discrete Output Channels 

• Output voltage range 10-30 VDC 
• Max. output power: 1A per channels, 8A per module, .8A at 60°C 1 channel, .4A at 60°C 8 channels at 24 VDC 
• Max. off state leakage: 0.01 mA (less than 10 uA) 
• Short circuit protection, self-reset fuses (trip above 1.5 Amp) 
• Min. load: 1 mA 
• Inrush current: 5 Amps (100 ms surge) 
• Typical on resistance: 0.3 Ohms (Drop 0.3 VDC @ 1 Amp) 
• Input isolation: 150 Volts (16 channel modules only) 
• All channels Scan rate: 1 ms 

Analog Input Channels 

• Analog Input Range: 4-20 mA 
• A/D resolution 16 bits (0.003%) 10 bits (fast option) 
• Full scale accuracy: +/- 0.02% (at 20 °C, 16 bit mode) 
• Temperature coefficient +/- 50 ppm per °C (span and offset) 
• Input impedance (resistance): 100 ohms 
• Protection: Self-resetting short circuit protection fuses 
• DMRR (differential mode) 66 db at 50/60 Hz 
• Fastest update time [# of chan.]: 880 ms [all] -16-bit; 145 ms [all] -14-bit; 1 ms [2] -10-bit

Analog Output Channels

• Analog output range: 4-20 mA 
• D/A resolution 16 bits (less than 1 uA) 
• Full scale accuracy +/-0.02% (at 20°C) 
• Span and offset temp. +/- 50 ppm per °C typ. 
• Max. output settling time 5 ms (to .05%) 
• Load resistance (@ 24 V) 0-750 Ohms 
• Load resistance (@ 10V) 300 Ohms 
• Current limiting short circuit protection
• PoE power internally supplies power to module intelligence, communications, and inputs.

​​Configuration

• Configured using Sixnet I/O Tool Kit
• Graphical User Interface (GUI)

Software & Firmware

Knowledge Base