Revision History - SXTOOLS

3.52.114

2012-01-19

Fixed Issues:

ID	Subject	Description
8615	Tool Kit	Added help for the System Information module configuration pages.

3.52.113X

2012-01-17

Fixed Issues:

ID	Subject	Description
8762, 8586	Tool Kit	Fixed bug that caused data corruption and loss while saving ET-MIX24880-D remote link information.
7090	Firmware Loader	Fixed the Firmware Loader Search Options dialog so it will now retain the selection settings.
8812	ISaGRAF	Fixed bug that caused the error message: "Unable to connect, Dialog with Resource failed" when attempting to download a new project to an RTU.
8732	Datalogging	Fixed issue that caused the datalog information to be shifted into the wrong columns.
8516	Datalog Server	Added the Citect Datalog Server to the Tool Kit installation.

3.52.112X

2012-01-10

Fixed Issues:

ID	Subject	Description
8678	Tool Kit	Fixed bug that would cause System Information module tag descriptions to appear in Station Status Module and Module Status Module tags.
8685	Tool Kit	Fixed bug in the connection list that caused incorrect station name selections for the I/O Gateway/RTU Station connection type.
8676	Tool Kit	Fixed problem with the IPm® configuration opening to the wrong part if the firmware loader has been used.

3.52.111X

2011-12-28

Fixed Issues:

ID	Subject	Description
8670	Tool Kit	Fixed Ethernet settings window draw issue for ET-2 stations using DHCP. This fixes a window drawing problem that failed to display the '--DHCP--' text for the primary interface on initial open.

3.52.106X

2011-12-20

New Features:

ID	Subject	Description
7128	ISaGRAF	Enabled export from a VT-IPm2m-113 or VT-IPm2m-213 to ISaGRAF v3.x workbench.

Fixed Issues:

ID	Subject	Description
8213	Tool Kit	Fixed EtherTRAK®2 remote I/O Links to use the correct IP address.
8544	Tool Kit	Fixed internal reference bug for: "IPm2m® Onboard I/O".
8356	Tool Kit	Fixed a bug that would create a project file corruption that would cause an error when re-starting Tool Kit.
8360	Tool Kit	Enabled the menu selections for: "Upgrade Firmware" and: "Show DHCP Status..." if ET-2s are selected from the tree view tabs.
8536	SIVM	Fixed bug that left old SIVM data in an IPm after an SIVM module was removed.
8556	Installer	Fixed uninstaller bug that would cause some files to be removed from the next installation of Tool Kit after a reboot.
8599	Tool Kit	Fixed error locating remote station IP address when the station is not using Ethernet.
8602	Test I/O	Fixed display of FO values in Test I/O to show zero decimal places instead of six when configured for zero.
8621	Tool Kit	Added module specific help for the E2/EB-10RTD - Analog Options tab.
8622	Tool Kit	Added module specific help for the E2/EB-10RTD - Analog input channels tab.
8623	Tool Kit	Added module specific help for the E2/EB-16ISOTC - Analog input channels tab.
8624	Tool Kit	Added module specific help for the E2/EB-16ISOTC - Analog Options tab.
8630	Tool Kit	Fix invalid "First AO register" entry in the remote I/O analog options for E2/EB-10RTD and E2/EB-16ISOTC.
8533	USB	Changed USB driver .inf file and directory name to generic: "USBSerial", and fixed uninstall error.

3.52.100X

2011-11-03

Fixed Issues:

ID	Subject	Description
8359	ISaGRAF	Fixed ISaGRAF v3.47 communications bug that displayed 'Error Creating Notification Thread'.
8372	Tool Kit	Fixed bug that prevented disabling physical input reads for IPm stations.
8371	Tool Kit	Fixed bug that caused a base EEROM write failure on VT-MIPM-131-D.
8368	Tool Kit	For RTUs, list module numbers in sorted order in the selection combo box.
8407	ISaGRAF	Fixed bug that included disabled tags in ISaGRAF export (false overlapped I/O error).
8411	Tool Kit	Fix problem with SIVM register start values being recalculated.
8369	Tool Kit	Restore FI, FO, LI, LO scale value editing capability.
8267	Tool Kit	Fix bug in support of 0-20 mA AO configuration for E2-MIX24882.
8326	Tool Kit	Fix bug that would automatically add a prefix to a copy of a module/station that had none.
8215	ISaGRAF	Fixed Link Setup not retaining the station number

3.51.123X

2011-10-11

Fixed Issues:

ID	Subject	Description
8201	Tool Kit	Fix Tool Kit crashing when the user double-clicks in the RTU configuration's "Files to Load" or "User Software" lists.
7931	Tool Kit	Fix appearance of duplicate IO transfers via remote link.

3.51.122X

2011-10-10

Fixed Issues:

ID	Subject	Description
7941	SIVM	Fix: SIVM displayed the wrong values for "Flow control" and "restart reason"

3.51.121X

2011-10-06

Fixed Issues:

ID	Subject	Description
7978	SIVM / Test I/O	Fix display of LI and FI units for SIVM in the Test IO window

3.51.120X

2011-10-05

New Features:

ID	Subject	Description
8204	Tool Kit	Support 0-20 mA AI configuration in Tool Kit for E2/EB-MIX24882

Fixed Issues:

ID	Subject	Description
8214	Tool Kit	Fix duplicate IO tag error which occurred even when tag restrictions were disabled
7979	Test I/O	Fix: Eth1 speed and status were blank for VT-MIPM-245-D.

3.51.119X

2011-10-03

Fixed Issues:

ID	Subject	Description
7924	SIVM	Fix fluctuating AI-0 values when an SIVM module is deleted from an existing configuration and loaded.
8211	SIVM/ISaGRAF	Added SIVM reset with each station configuration load.
7879	Tool Kit	Fix the starting address for DO in MIX modules.
8196	Tool Kit	Fix saving of analog scaling information for combination I/O modules.
8109	Tool Kit	Initially select "Output" in calibration if module is only AO.
7317	Tool Kit	Fix display of I/O transfers "To Discrete Out"/"To Analog Out" local start values.

3.51.117X

2011-09-26

Fixed Issues:

ID	Subject	Description
7949	Tool Kit	Fix crash when project file may contain invalid tags.
7887	Tool Kit	Fix crash when Analog Output Module type selected.

3.51.116X

2011-09-20

Fixed Issues:

ID	Subject	Description
8110	Tool Kit	Fix I/O transfer settings for ISO modules.

3.51.115X

2011-09-16

New Features:

ID	Subject	Description
7753	Tool Kit	Added six32com.exe to display in About box.
7781	Tool Kit	Add message to discrete tabs if no discretes are available.

3.51.111

2011-09-06

Fixed Issues:

ID	Subject	Description
7479	Configuration	Fixed crash when trying to copy a station
7781	Configuration	Fixed blank analog and discrete tags for 16ISO20M
7713	Configuration	Fixed blank tag description for Analog I/O on E2 modules.
7801	Help	Fixed issue where version reported under help can be one greater than the version in the installer
7744	OEM	Added some OEM P/N's
7775	Redundancy	Fixed Tool Kit crash on second deselection of redundancy

3.50.088

2011-08-12

New Features:

ID	Subject	Description
7524	OEM	Improved OEM rebranding flexibility.

Fixed Issues:

ID	Subject	Description
7512	EtherTRAK2	Fixed bug that always showed high speed counter 4 enabled after performing a read back operation.
7366	System Information Module	Fixed bug that did not save the reset enable.
6520	Ring Switch Monitoring	Default tag names are now consistent with naming used in other areas of the Tool Kit.
7516	SIVM	Changed SIVM port names in port status section to match spec
7471	EtherTRAK	Fixed EtherTRAK configuration load failure when unit is at factory defaults.
7507	Licensing	Fixed a bug where registered add-ons could be lost in some cases.
7577	SIVM/Redundancy	Fixed duplicate tags when using Redundancy with SIVM by removing the automatic tag assignments.
7291	ISaGRAF/OEM	Updated publisher name and values to correct versions
7142	Registration	Fixed some awkward wording and generally improved the text
7341	SIVM	Added more meaningful value labels to the status registers
7345	Help	Fixed copyright attribution in Test I/O's Help/About
7575	Install	Fixed warning messages during DNP3 installation.
7152	USB	Fixed reinstall of USB driver after manually deleting it from devices manager and then reinstalling the toolkit
7166	UI	Fixed issue with overlapping window buttons when installing E2-16ISO20M modules
6523	Test I/O	Fixed issue where RC-EIO2-16ISOTC-D modules display large values on disabled channels
7689	Communications	Fixed issue with communications manager locking communications in some cases.
7707	Configuration Loading	Fixed bug which would reset the IPm after every config load. Now only does it if needed.
7735	Redundancy	Setting redundant IP address of 0.0.0.0 (empty address) now works.
7707	Configuration	Fixed issue which would reset the unit on every config load

3.50.080

2011-07-26

Fixed Issues:

ID	Subject	Description
7515	System Information Module	Fixed bug that resulted in wrong tag names when changing the number of registers.
6935	System Information Module	Fixed bug that resulted in empty tag names when adding from context menu.
5775	Calibration	Fixed reset problems when exiting the calibration wizard.

3.50.078

2011-07-01

New Features:

ID	Subject	Description
7239	EtherTRAK2	Added 2 additional high speed counters to E2-MIX24882 (total of 4). Requires module hardware revision 0102.

Fixed Issues:

ID	Subject	Description
7372	Counter Time Base	Fixed bug that overwrote counter time bases when changing sink/source settings.
7341	System Information Module	Fixed minor bug that displayed scaled min/max values for discrete tags.
7322	System Information Module	Fixed bug that failed to write [port status] values when IO Transfers use station number instead of name.
7063	IO Transfers	IO Transfers to remote IO modules were not loaded with the correct IP address.
7197	Auto-Open Feature	If the previous file was removed and the 'Auto-Open Last Project File' was enabled, the Tool Kit would crash.
6945	System Information Module	The [port status] section was not written when empty.

3.50.068

2011-05-27

Fixed Issues:

ID	Subject	Description
7105	Port Configuration	After loading firmware, port settings may have failed to load depending on timeout value.

3.50.067

2011-06-02

New Features:

ID	Subject	Description
6660	System Information	Added System Information module. Requires IPm firmware 4.2.1014 and module daemon.
6636	0-20 mA Analog Outputs	Added 0-20 mA capability to m2m-213 and E2-MIX24882 for analog outputs. Requires IPm firmware 4.2.1014 and E2 firmware 1.11.
6660	System Information	Added 'Redundancy Role' to redundancy module. This is used by the system information module.

Fixed Issues:

ID	Subject	Description
6856	Repair Old Install Issues	Upon running the .067 install, previous install and uninstall issues will be repaired. 'Control Panel -> Add or Remove Programs' list is cleaned of dead links.

3.50.056

2011-04-28

Fixed Issues:

ID	Subject	Description
6813	ISaGRAF Options	Fixed bug that failed to store and read hot restart options.
6806	ST-MIX-12884 Counters	Fixed bug that loaded 'Count Up' type only for ST-MIX-12884.
6802	m2m and combination IO	Fixed bug that left AO ranges at defaults (10V). 4-20 mA range is now loaded.
6790	Uninstall	Fixed problem with slashes in 'I/O' paths which prevented the uninstall from completing properly.
6731	Test IO	Fixed bug Test IO that displayed the wrong units for rate counters.
6694	EtherTRAK2 Web UI	Fixed bug in loading from the Tool Kit which resulted in the Web UI showing incorrect tag names.
6670	EtherTRAK2	EtherTRAK2 station names were not enforced to be unique which caused DAO errors.
6656	Remote I/O Links	Fixed bug that failed to remove remote I/O links when the target EtherTRAK2 was deleted.
6489	Import	EtherTRAK2 stations were missing from the 'IO Definitions' import.
5737	Project Files	Fixed bug that crashed the Tool Kit when opening a read-only file.
6741	Install	Fixed missing .customize files for DNP3, AGA, and IEC60870.
6693	EtherTRAK2	Fixed bug that crashed the Tool Kit when reducing the number of I/O in an EtherTRAK2 station.
6719	IPm2m	Fixed register shifting bug when the on-board I/O module is not the first in the list.

3.50.045

2011-04-01

New Features:

ID	Subject	Description
6596	IPm	Added capability to monitor ISaGRAF. See the advanced tab of an IPm station configuration.

Fixed Issues:

ID	Subject	Description
6471	IPm2m	Fixed AO register range problem in calibration of IPm2m® (-213).