Sixnet® I/O Tool Kit Revision History

Jump to series:

5.1.102

2022-04-04

New Features & Changes:
ID	Subject	Description
458	Tool kit	Releasing VT-MIPm-138-D and VT-MIPm-248-D.

Fixed Issues:
ID	Subject	Description
460	Tool kit	The secondary controller in redundancy can have any station name and not necessarily _bak.
462	Tool kit	Any invalid E2 module & base pairing is readback as Mix modoule.

5.1.101

2022-02-25

Fixed Issues:
ID	Subject	Description
456	Toolkit	The Toolkit should accept and load FWs0100.bin as E2-16DISOE firmware file.

5.1.100

2021-08-14

New Features & Changes:
ID	Subject	Description
359	Tool kit	Added E2-16DI24-HV, E2-16DISoE-HV and E2-16ISO20M-HV Module in ST-IPM-8460 and Tool kit.
358	E2 Firmware version 2.09 and Web UI version 1.20	Added support for E2-16DI24-HV and E2-16ISO20M-HV.
360	Calibration is disabled for E2-16ISO20M-HV	Calibration of E2-16ISO20M-HV module is disabled.
361	Analog Options is configurable in 16DI24-HV Web UI	“Analog input integration” option is removed from the Analog Options in the WebUI of 16DI24-HV module.
362	Screw terminal assignment for 16DI24-HV & 16ISO20M-HV	In WebUI the Screw Terminal Assignment in Documentation is made available for 16DI24-HV and 16ISO20M-HV modules.

Fixed Issues:
ID	Subject	Description
456	Toolkit	The Toolkit should accept and load FWs0100.bin as E2-16DISOE firmware file.
341	Digital Input Module(E2-16DI24)	The Issue of the pair of DI channels acting as 32 bit counter even after the deselecting "Report as 32 bit counter result as pair of register" is resolved.
345	Format Battery Backed RAM	The issue of COM Port being locked after NVRAM format is resolved.
389	Clear Configuration of ST-IPm-8460	The issue of Toolkit crash during Clear Configuration operation of ST-IPm-8460 is resolved.

5.0.103

2021-10-27

Fixed Issues:
ID	Subject	Description
389	Tool Kit	The issue of Tool kit crashing on Clear Configuration is resolved.
345	Tool Kit	The issue - After NVRAM format the RTU boots up, but cannot communicate with the Toolkit via COM Port- is resolved.

5.0.102

2021-03-17

New Features & Changes:
ID	Subject	Description
201	Tool kit	Added Red Lion Workbench redundancy support in ST-IPM-8460 and Tool kit.
321	Red Lion Workbench	Red Lion Workbench serial support changed from serial Port A to Port B.

Fixed Issues:
ID	Subject	Description
322	Tool Kit	Unused variables and their values were present in general.config file of ST-IPM-8460. Now these Unused variables values are Null.

5.0.101

2020-10-05

New Features:
ID	Subject	Description
188	Tool Kit	Added Icon in Tool kit Menu to open Red Lion Workbench..

Fixed Issues:
ID	Subject	Description
199	Tool Kit	When exporting tags from the Tool Kit to Red Lion Workbench project, the Floats were exported as Reals and Longs were exported as DWORDs. Now both are exported as DINT.
203	Tool Kit	Fixed the extraction of E2 firmware bundles issue. Now, it can be launched more than once.
158	Installation	Tool Kit 5.0.101 can be installed on Windows XP virtual machine.
214	Tool Kit	Fixed the Tool Kit Crashing issue, when exporting tags to Red Lion Workbench.
237	Tool Kit	Resolved the issue of creating tag description file.
198	Red Lion Workbench	Now, Red Lion Workbench Project gets compiled as a Big Endian also.
180	Red Lion Workbench	Red Lion Workbench supports serial port.

5.0.100

2019-11-29

New Features:
ID	Subject	Description
161	Tool Kit	Added Red Lion Workbench support.

Known Issues:
ID	Subject	Description
158	Installation	Tool Kit 5.0.100 cannot be installed on Windows XP virtual machine.

4.0.173

2019-07-30

New Features:
ID	Subject	Description
106	IPM Performance	Updated minimum scan time as 8mSec in E2 configuration.

Fixed Issues:
ID	Subject	Description
38	User Operations	Fixed User Operations bug related to add and delete user.

Known Issues:
ID	Subject	Description
158	Installation	Tool Kit 4.0.172 and 4.0.173 cannot be installed on Windows XP virtual machine.

4.0.xxx

2015-08-31

New Features:
ID	Subject	Description
14425	Modbus	Support configuration of word order in 32-bit registers when communcating via Ethernet.
14650	USB	Support COM port numbers greater than nine for communicating with stations.

Fixed Issues:
ID	Subject	Description
4692	EtherTRAK-2	In some cases when communicating via Ethernet, it was not possible to "wink" the LED on an EtherTRAK-2 module.
8407	ISaGRAF	In some cases the Tool Kit would incorrectly report overlapping tags when exporting to ISaGRAF.
8411	SIVM	The start address for SIVM tags was not always saved correctly.
8684, 11591, 11722, 11806, 12318, 12319, 12322, 13043, 13119, 14545	Help	Revised numerous help pages.
9421	Datalogging	In some cases the datalog server would not start.
9534	Datalogging	It was not always possible to delete datalog configurations from the RTU.
11368	Datalogging	It was not always possible to load datalog configuration to FLASH.
12616	Firmware loading	The timeout used when loading firmware to an RTU has been increased to make the process more robust.
12701	AGA	In some cases the AGA configuration window would crash.
12931	Installation	Support 64-bit versions of Windows.
12970, 13880, 14983, 15129, 15136	Communication	In some cases the helper process `six32com` would hang or crash resulting in failed communciation between the Tool Kit and the station.
13109	Projects	The Tool Kit now stores projects and other data in the directory named in `$ProgramData` (typically `C:\ProgramData`) by default.
13644	Connected Stations	In some cases, clicking on a station in the list of connected stations crashed the Tool Kit.
13646	IPm	The Tool Kit can no longer download firmware to obsolete RTU models with 8MB of NOR. Some early hardware revisions of ST-IPm-2350, ST-IPm-1350, VT-IPm-1410, VT-IPm-2410, VT-mIPm-241-D, VT-mIPm-131-D, VT-uIPm-431-H, VT-uIPm-441-H, ST-GT-1210, and ET-GT-ST-3 are affected.
13673	Datalogging	Large data records sometimes included invalid timestamps or data.
13745	I/O Transfers	Modbus register addresses greater than 32000 were not handled correctly.
13984	New Station	An invalid serial number was sometimes displayed when creating a new station.
14195	I/O Transfers	IP addresses in I/O Transfers were not updated when changes were made elsewhere in the project.
14222	I/O Transfers	Remote starting addresses for transfers were incorrectly changed in response to Modbus reconfiguration.
14260	I/O Transfers	In some cases extra, blank I/O Transfers were created.
14462	Installation	Some DLLs could not be registered or unregistered when installing or uninstalling the Tool Kit.
14553	EtherTRAK-2	In some cases, reading back configuration from an EtherTRAK-2 module displayed incorrect results.
14681	Installation	The USB serial driver distributed with the Tool Kit has been signed so it passes stricter security requirements in later versions of Windows.
14962	Atomic Configuration	In some cases an atomic configuration package could not be created.
15019	Atomic Configuration	In some cases, atomic configuation packages would not load properly into the RTU.
15027	Security	Creating firewall configuration for the RTU could sometimes crash the Tool Kit.
15095	EtherTRAK-2	Under conditions of heavy network load, loading firmware to an EtherTRAK-2 module could fail.
15145	Port Forwarding	Configuration of Port Forwarding in the RTU has been removed from the Tool Kit.

3.60.118

2014-04-16

New Features:
ID	Subject	Description
13043	EtherTRAK-2	Added 16ISOTC wiring diagram to help.
12665	IPm	Optimized clear configuration.

Fixed Issues:
ID	Subject	Description
13211	IPm	Fixed issue where comm port could become inaccessible after a NVRAM format.
13118	IPm	Clarified setting in advanced RTU configuration page.
13021	IPm	Improved reliability of changing station numbers.
12971	IPm	Improved Datalog configuration readback.
12970	EtherTRAK-2	Addressed occasional communication failures.
12950	Tool Kit	Fixed errors loading configuration after formatting battery backed RAM.
12931	Firmware Loader	Fixed freeze-up issue when upgrading firmware.
12919	Tool Kit	Fixed problem with clearing RTU configuration.
12912	Tool Kit	Fixed crash when resetting comm port.

3.59.134

2014-01-10

New Features:
ID	Subject	Description
12323	Help	Added help for the SNTP synch bit.
12322	Help	Added help for the Datalog status bits.
12319	Help	Added help for the Batch loading feature.
12318	Help	Added help for UDR-A.
12011	Tool Kit	Added scan time information in the EtherTRAK-2 filtering options dropdown for AI modules.
10917	Tool Kit	Added datalogging status bit configuration.
10899	Tool Kit	Added protection from loading firmware v4.8 or greater to 16MB IPms.

Fixed Issues:
ID	Subject	Description
12627	Tool Kit	Fixed bug that caused SixTRAK module status LEDs to continue flashing after the module was linked and the project changes were applied.
12616	Firmware Loader	Increased timeout in the Tool Kit's firmware loader.
12615	Tool Kit	Fixed bug that caused an error when reading the firmware version.
12570	Tool Kit	Fixed error in calculation of register counts in the RTU configuration I/O transfers.
12569	Test I/O	Fixed error in unit representation for remote I/O modules.
12526	Help	Added details to "Restart Reason" in the SIVM help.
12518	Tool Kit	Fixed crash issue when creating an atomic configuration package with an invalid .x6m file location.
12496	Tool Kit	Fixed default configuration for the E2/EB-MIX24880 to disable the "Use last 8 discrete channels as outputs" option.
12493	Help	Fixed typo in SIVM help information.
12492	Installation	Updated the Licensing Agreement.
12489	Tool Kit	Fixed atomic loading operation to provide a warning if attempting to load an atomic configuration that is too large.
12477	Tool Kit	Clarified atomic configuration loading communication errors.
12461	Tool Kit	Fixed bug in I/O transfer configuration that would change the remote station number to zero.
12453	Tool Kit	Fixed error when reading the station's version information.
12293	Tool Kit	Fixed saving of RS-485 settings in old VT stations.
12221	Tool Kit	Fixed channel listing errors in main Tool Kit screen.
12220	Tool Kit	Fixed trouble importing EtherTRAK-2 tag names into remote I/O tags.
12209	Tool Kit	Removed "current hardware revision" listing when loading to an EtherTRAK-2.
12207	Help	Updated the SIVM help to include the reset type of SysRstTrig.
12205	Help	Updated RTU configuration discrete options help.
12153	Tool Kit	Added warning if attempting to load a DSM module to a device which has firmware that does not support it.
12152	Tool Kit	Fixed selectability issue of status bits in datalog configuration.
12016	Help	Updated the wiring and specifications for EtherTRAK-2 modules.
12008	Tool Kit	Fixed flickering mouse-over issue in tree view.
12006	Tool Kit	Fixed datalog configuration log rate modification issue.
12003	Tool Kit	Fixed inability to Create a new Virtual Module via Tree View.
12001	Tool Kit	Fixed issue of "No Remote I/O Links in Project" message appearing multiple times when adding a module to an RTU.
11999	Tool Kit	Fixed Icon for ET-GT-ST-3 to match in tree view and "create new module" dialog dropdown.
11998	Tool Kit	Fixed issue of name changing from RTU to Gateway Configuration under Tree View.
11997	Tool Kit	Fixed issue of tag description info for station status module getting copied from system information module.
11972	Tool Kit	Fixed issue of scan time not being saved under remote IO Link.
11959	Tool Kit	Fixed issue of serial number and version command errors appearing after performing a clear configuration operation.
11956	Test I/O	Fixed issue of AX8-AX15 showing as disabled within Test I/O.
11938	Tool Kit	Disabled selection for diagnostic information for EtherTRAK-2s since no diagnostic information would be returned.
11932	Tool Kit	Fixed issue of Tool Kit crashing while modifying the number of Analog output registers for EtherTRAK-2 modules.
11931	Tool Kit	Fixed issue of ST-DI-CNT-08U configuration reporting that "There are no discrete registers available/enabled on this module."
11930	Tool Kit	Fixed issue in the AGA configuration add-on that while assigning tags, the tags are blacked out and it is hard to make assignments correctly.
11929	Test I/O	Fixed issue of "Disabled" showing for registers that should not be disabled.
11928	Tool Kit	Fixed the issue of the previously loaded project reloading automatically when the user attempts to create a new project.
11927	Tool Kit	Fixed the issue of the Network IP settings disappear for EtherTRAK-2 modules when changing between Dual Ethernet Modes and Network 1/2 tabs.
11919	Tool Kit	Fixed the issue of the Network IP settings for remote I/O modules not saving when configured from context menu in the tree view.
11908	Tool Kit	Fixed the issue of the remote I/O register configuration list behaving oddly if the "Enter" key is pressed while editing the bottom register.
11907	Tool Kit	Fixed the issue of Tool Kit crashing when attempting to load an invalid configuration.
11906	Tool Kit	Fixed the issue of an invalid configuration being created when changing an RTU from a VT-IPm-1410 to a VT-IPm2m.
11903	Tool Kit	Fixed the issue of the EtherTRAK-2 Drop Physical Outputs option becoming enabled for AI Modules after performing a read-back operation.
11900	Tool Kit	Fixed the issue of the "Load all now" operation not loading the project archive.
11899	Tool Kit	Fixed the issue of text disappearing from the EtherTRAK-2 loading dialog if you click on the window randomly.
11891	Tool Kit	Fixed the issue that would cause Tool Kit to crash if there was a blank entry in the I/O transfer table when attempting to download the configuration to the RTU or create an atomic configuration file.
11860	Tool Kit	Fixed the issue that would cause a checkbox in the tree views column to not change until you moved the cursor off it.
11855	Tool Kit	Fixed the issue that would cause "Unknown analog input range" errors when reading back an E2/EB-16ISOTC configuration.
11847	Tool Kit	Fixed the issue that would cause an RTU to not recognize changes to Modbus starting addresses.
11844	Tool Kit	Fixed the issue that would cause the mouse pointer to disappear when it was hovering over a "+" on the RTU configuration Advanced tab.
11837	Tool Kit	Fixed the issue that would cause the "Time Sync Status bit type" and "Time Sync Status bit address" to be selectable even when "Enable Time Sync Status bit" box was unchecked (which was contrary to specifications).
11815	Tool Kit	Fixed the issue that when copying a station to another project, it wouldn't copy the "connected to" information.
11811	Tool Kit	For EtherTRAK-2 I/O transfers, the "Create Virtual Module" checkbox was removed since it was not applicable.
11806	Firmware Loader	Fixed the help button in the EtherTRAK-2 firmware loader dialog.
11722	Help	Added help information to explain why there appears to be a discrepancy between the IP address shown on the Tool Kit status bar and the address shown in the RTU configuration when the IP is calculated automatically.
11687	Tool Kit	Fixed the issue of the SIVM values for "Free NVRAM", "Total NVRAM", "Total Datalog Memory", and "Free Datalog Memory" only displaying zeros in Test I/O due to their fractional values.
7711	Tool Kit	Fixed the issue of the third and fourth counter timebases not being equivalent for EtherTRAK-2 modules with four high-speed counters.

3.58.103

2013-07-01

New Features:
ID	Subject	Description
11776	Tool Kit	Add support for SSH in the ST-IPM-8360.
11736	Tool Kit	Add SNTP clock sync status configuration.
11444	Tool Kit	Add support for RTUs: ST-IPM-8360, VT-mIPm-138-D, and VT-mIPm-248-D.

3.57.115

2013-06-07

New Features:
ID	Subject	Description
11647	Tool Kit	Include the status of the loaded atomic configuration package to the SIVM AI26 value.
11525	Tool Kit	Add RTU model ID to atomic configuration package.
11517	Tool Kit	Include the CRC of the loaded atomic configuration package to the SIVM L10 value.
11474	Tool Kit	Name the file extension for an atomic configuration package to be ".6cp".
11424	Tool Kit	Reorganize the atomic configuration menu items.
11423	Tool Kit	When selecting stations to create atomic configuration packages for, automatically select the redundant counterpart of redundant pairs.
11187	Tool Kit	Only provide the menu options for the CITECT server when it is registered.
10924	Tool Kit	Provide Tool Kit executable parameters to create and load atomic configuration packages from the command-line.
10872	Tool Kit	Allow Tool Kit to create and maintain the RTU user IDs for auditing purposes.
10628	Firmware Loader	Prevent accidental downloading of incompatible firmware to an RTU that contains a large NAND sector size.

Fixed Issues:
ID	Subject	Description
11689	Tool Kit	Fix error when including a project archive during a configuration load.
11368	Datalogging	Fix incorrect firmware version error when the datalog configuration is being loaded to FLASH.
11268	Tool Kit	Fix hardware revision error while trying to load a configuration with Channels 3 and 4 as H.S counters on an E2-MIX20884.
10882	Tool Kit	Include the missing BEP driver and configuration add-on.

3.56.126

2013-03-15

New Features:
ID	Subject	Description
11251, 11155, 10870, 10710, 10639, 10612	RTU	Added configuration of users and additional permissions for authenticated UDR protocol.
10429	Tool Kit	Allow relative paths when specifying RTU files to load.
10355	RTU	Added functionality for transmitting a configuration package to an RTU.
9236	Tool Kit	Increased Tool Kit speed when loading large project files.

Fixed Issues:
ID	Subject	Description
11273	EtherTRAK-2	Fix EtherTRAK-2 user configuration so that a deleted user's permissions will not overwrite the "No Login Required" permissions.
11105	EtherTRAK-2	Fix high speed counters for E2-16DI24 and E2-32DI24 modules.
10492	EtherTRAK-2	Added password strength indicator and updated the help file.
10405	Tool Kit	Fixed setting corruption if a comma exists in the project file path.

3.55.102

2012-10-09

New Features:
ID	Subject	Description
10123	EtherTRAK-2	Added heartbeat monitoring watchdog features.
6812	EtherTRAK-2	Support dashes in the station names in the main station list.

Fixed Issues:
ID	Subject	Description
10326	Tool Kit	Improved naming consistency by changing the terminology in the IPm port configuration from "Ethernet1" and "Ethernet2" to "Network 1/Eth0" and "Network 2/Eth1" respectively.
10325	Tool Kit	Changed the labels in IPm Advanced Ethernet from "Ethernet1" and "Ethernet2" to "Network 1/Eth0" and "Network 2/Eth1" respectively.
10324	Tool Kit	Changed the text in the IPm redundancy configuration window from "Eth0" and "Eth1" to "Network 1/Eth0" and "Network 2/Eth1" respectively.
10256	Tool Kit	Fixed bug that caused the initial discrete and analog output addresses to start at "-1" when a VT-IPm-1410 contained a remote link to a RM-RTU-8440 module.

3.54.109

2012-08-10

New Features:
ID	Subject	Description
10156	Installation	Changed the Tool Kit installer and uninstaller icons to be aesthetically more appealing.
9665	Tool Kit	Changed the Tool Kit icon to be aesthetically more appealing.
9242	Tool Kit	Added the ability to delete more than one I/O transfer at once.
9237	Tool Kit	Added the ability to delete more than one module at once.

Fixed Issues:
ID	Subject	Description
10133	Tool Kit	Enabled Lead and Lag time entries for the IPm RS-485 port configuration.
10058	Tool Kit	Fixed crashing problem after multiple "Read Back" operations.
9966	Tool Kit	Disabled ineffective scaling values for I/O types LI, LO, FI, and FO. This helps to prevent some confusion about their operation.
9936	Datalogging	Fixed the minimum log rate for the VT-IPm2m-113/213 so that it can be set below 200ms.
9905	ISaGRAF	In ISaGRAF export: Fixed bug that always selected FIs for SIVM, removed redundant backup stations, and changed the maximum number of channels per device from 32 to 128.
9851	Datalogging	Fixed a bug that would attempt to load SiteTRAK/RemoteLog sixlog datalog configurations the same way as IPms resulting in error code 0x02.
9823	Firmware Loader	Fixed error when updating firmware from a zip file using Ethernet-only connection.
9793	ISaGRAF	Automatically correct various ISaGRAF project file errors and discrepancies that could cause problems opening and running them.
9768	Tool Kit	Fixed Modbus communications failure over RS-485 at certain baud rates on EtherTRAK-2 modules.
9767	Tool Kit	Fixed blank default module name when copying to another project.
9765, 8712	Tool Kit	Fixed error when copying a module from an IPm to an IPm in another project.
9697	Tool Kit	Fixed loading old projects which have IPms with on-board analog outputs and counters.
9673	Tool Kit	Set default number of decimals to six for floating point inputs and outputs.
9658	Tool Kit	Added descriptive error when Tool Kit upgrade file creation fails.
9652	Datalogging	Fixed issue with datalogging that caused corruption of date stamps and data misalignment and also caused triggered events to to report incorrect discrete values.
9534	Tool Kit	Fix mismatch between main datalog list and load advanced list.
9512	ISaGRAF	Fixed debugging errors that would occur when running an ISaGRAF project that was created using an earlier version of ISaGRAF.
9482	Tool Kit	Fixed issue with E2/EB-10RTD, E2/EB-8ISOTC, and E2/EB-16ISOTC resetting their scale values back to defaults after being configured.
9236	Tool Kit	Set preferred base addresses for Tool Kit DLLs.
8975	Help	Clarified SIVM information within the standard Tool Kit help.
8871	Tool Kit	Fix invalid component update message during Tool Kit startup if ISaGRAF had been uninstalled.
7288	Help	Fixed problem with help for the "Copy Prior" button while configuring tags.

3.53.109

2012-04-13

New Features:
ID	Subject	Description
6251	Firmware Loader	Added the ability to find the matching firmware image file within a zip archive containing files for multiple IPm types.
9005	Tool Kit	Add warning for consecutive underscores in tag names.
9013	Installation	Add Windows 7 USB-to-serial driver support.
8975	Help	Add SIVM information to the standard Tool Kit help.

Fixed Issues:
ID	Subject	Description
9587	Tool Kit	Fixed invalid starting DI/DO values for new module configurations added to IPms.
9421	Datalog	Fixed "Server not registered" error when starting the datalog server.
9531	Datalog	Fixed Tool Kit crash when reading back datalog configuration information from a redundant station.
9412	Installation	Fixed installation and registering of HTML Help components.
9508	Tool Kit	Fixed display of secondary IP information in IPm redundant controller options if there is no second Ethernet port.
6429	Tool Kit	Fixed Ethernet communication failure while running in 64-bit Windows 7.
9502	Tool Kit	Fixed inter-station duplicate tag name error detection failure.
9384	Installation	Fixed installation issues regarding uninstallation and updating new software components.
9013	USB Driver	Eliminated failure message in log listing when installing in 64-bit Windows 7.
9330	Tool Kit	Port settings are retained when changing a station type to another compatible type (for example, changing a VT-MIPM-131-D to a VT-MIPM-135-D).
9331	Tool Kit	Analog scaling settings are retained when changing the station type between a VT-MIPM-131-D and a VT-MIPM-135-D.
9392	Log Viewer	Fixed log viewer crashing issue when reading records from the ST-IPM-6350.
9406	Tool Kit	Fixed range selection drop-down list for E2/EB-MIX24882 counter channels.
8996	Tool Kit	Eliminate error message if automatic update web site is not accessible.
7090	Firmware Loader	Update firmware loader version to 1.13.
8837	Tool Kit	When tag names are auto-generated, consolidate double underscores.
9412	Installation	Always include the HTML Help control.
8871	Installation	In Windows 7, automatically configure Tool Kit for XP SP3 compatibility.
8684	Help	Include "AlarmConfigurationHelp.pdf" document in Tool Kit installation.

3.52.114

2012-01-19

New Features:
ID	Subject	Description
7128	ISaGRAF	Enabled export from a VT-IPm2m-113 and VT-IPm2m-213 to ISaGRAF v3.x workbench.

Fixed Issues:
ID	Subject	Description
8615	SIVM	Added help for the SIVM configuration pages.
8762, 8586	Tool Kit	Fixed bug that caused data corruption and loss while saving ET-MIX24880-D remote link information.
7090	Firmware Loader	Fixed the Firmware Loader Search Options dialog so it will now retain the selection settings.
8812	ISaGRAF	Fixed bug that caused the error message "Unable to connect, Dialog with Resource failed" when attempting to download a new project to an RTU.
8732	Datalogging	Fixed issue that caused the datalog information to be shifted into the wrong columns.
8516	Datalog Server	Added the Citect Datalog Server to the Tool Kit installation.
8678	Tool Kit	Fixed bug that would cause SIVM tag descriptions to appear in Station Status Module and Module Status Module tags.
8685	Tool Kit	Fixed bug in the connection list that caused incorrect station name selections for the I/O Gateway/RTU Station connection type.
8676	Tool Kit	Fixed problem with the IPm configuration opening to the wrong part if the firmware loader has been used.
8670	Tool Kit	Fixed Ethernet settings window draw issue for EtherTRAK-2 stations using DHCP. This fixes a window drawing problem that failed to display the '--DHCP--' text for the primary interface on initial open.
8213	Tool Kit	Fixed EtherTRAK-2 remote I/O Links to use the correct IP address.
8544	Tool Kit	Fixed internal reference bug for "IPm2m Onboard I/O".
8356	Tool Kit	Fixed a bug that would create project file corruption that would cause an error when re-starting Tool Kit.
8360	Tool Kit	Enabled the menu selections for "Upgrade Firmware" and "Show DHCP Status..." if EtherTRAK-2s are selected from the tree view tabs.
8536	SIVM	Fixed bug that left old SIVM data in an IPm after the module was removed.
8556	Installer	Fixed uninstaller bug that would cause some files to be removed from the next installation of Tool Kit after a reboot.
8599	Tool Kit	Fixed error locating remote station IP address when the station is not using Ethernet.
8602	Test I/O	Fixed display of FO values in Test I/O to show zero decimal places instead of six when configured for zero.
8621, 8622, 8623, 8624	Tool Kit	Added module specific help for E2/EB-10RTD and E2/EB-16ISOTC.
8630	Tool Kit	Fixed invalid "First AO register" entry in the remote I/O analog options for E2/EB-10RTD and E2/EB-16ISOTC.
8533	USB	Changed USB driver .inf file and directory name to generic, "USBSerial", and fixed uninstall error.
8359	ISaGRAF	Fixed ISaGRAF v3.47 communications bug that displayed 'Error Creating Notification Thread'.
8372	Tool Kit	Fixed bug that prevented disabling physical input reads for IPm stations.
8371	Tool Kit	Fixed bug that caused a base EEROM write failure on VT-MIPM-131-D.
8368	Tool Kit	For RTUs, list module numbers in sorted order in the selection combo box.
8407	ISaGRAF	Fixed bug that included disabled tags in ISaGRAF export (false overlapped I/O error).
8411	Tool Kit	Fixed problem with SIVM register start values being recalculated.
8369	Tool Kit	Restore FI, FO, LI, LO scale value editing capability.
8267	Tool Kit	Fixed bug in support of 0-20 mA AO configuration for E2-MIX24882.
8326	Tool Kit	Fixed bug that would automatically add a prefix to a copy of a module/station that had none.
8215	ISaGRAF	Fixed Link Setup not retaining the station number.

3.51.123X

2011-10-11

Fixed Issues:
ID	Subject	Description
8201	Tool Kit	Fixed Tool Kit crashing when the user double-clicks in the RTU configuration's "Files to Load" or "User Software" lists.
7931	Tool Kit	Fixed appearance of duplicate I/O transfers via remote link.

3.51.122X

2011-10-10

Fixed Issues:
ID	Subject	Description
7941	SIVM	Fixed the SIVM display of wrong values for "Flow control" and "restart reason".

3.51.121X

2011-10-06

Fixed Issues:
ID	Subject	Description
7978	SIVM / Test I/O	Fixed the display of LI and FI units for the SIVM in the Test I/O window.

3.51.120X

2011-10-05

New Features:
ID	Subject	Description
8204	Tool Kit	Support 0-20 mA AI configuration in Tool Kit for E2/EB-MIX24882.

Fixed Issues:
ID	Subject	Description
8214	Tool Kit	Fixed duplicate I/O tag error which occurred even when tag restrictions were disabled.
7979	Test I/O	Fixed Eth1 speed and status so they are not blank for the VT-MIPM-245-D.

3.51.119X

2011-10-03

Fixed Issues:
ID	Subject	Description
7924	SIVM	Fixed fluctuating AI-0 values when a SIVM is deleted from an existing configuration and loaded.
8211	SIVM/ISaGRAF	Added SIVM reset with each station configuration load.
7879	Tool Kit	Fixed the starting address for DO in MIX modules.
8196	Tool Kit	Fixed saving of analog scaling information for combination I/O modules.
8109	Tool Kit	Initially select "Output" in calibration if module is only AO.
7317	Tool Kit	Fixed display of I/O transfers "To Discrete Out"/"To Analog Out" local start values.

3.51.117X

2011-09-26

Fixed Issues:
ID	Subject	Description
7949	Tool Kit	Fixed crash issue when project file may contain invalid tags.
7887	Tool Kit	Fixed crash issue when Analog Output Module type selected.

3.51.116X

2011-09-20

Fixed Issues:
ID	Subject	Description
8110	Tool Kit	Fixed I/O transfer settings for ISO modules.

3.51.115X

2011-09-16

New Features:
ID	Subject	Description
7753	Tool Kit	Added six32com.exe to display in About box.
7781	Tool Kit	Add message to discrete tabs if no discretes are available.

Fixed Issues:
ID	Subject	Description
7090	Firmware Loader	Firmware load issue with v1.11 loader. Would not find firmware if using a .zip.

3.51.111

2011-09-06

Fixed Issues:
ID	Subject	Description
7479	Configuration	Fixed crash when trying to copy a station.
7781	Configuration	Fixed blank analog and discrete tags for 16ISO20M.
7713	Configuration	Fixed blank tag description for Analog I/O on E2 modules.
7801	Help	Fixed issue where version reported under help can be one greater than the version in the installer.
7744	OEM	Added some OEM P/N's.
7775	Redundancy	Fixed Tool Kit crash on second deselection of redundancy.

3.50.088

2011-08-12

New Features:
ID	Subject	Description
7524	OEM	Improved OEM rebranding flexibility.

Fixed Issues:
ID	Subject	Description
7512	EtherTRAK-2	Fixed bug that always showed high speed counter 4 enabled after performing a read back operation.
7366	SIVM	Fixed bug that did not save the reset enable.
6520	Ring Switch Monitoring	Default tag names are now consistent with naming used in other areas of the Tool Kit.
7516	SIVM	Changed SIVM port names in port status section to match spec.
7471	EtherTRAK	Fixed EtherTRAK configuration load failure when unit is at factory defaults.
7507	Licensing	Fixed a bug where registered add-ons could be lost in some cases.
7577	SIVM/Redundancy	Fixed duplicate tags when using Redundancy with a SIVM by removing the automatic tag assignments.
7291	ISaGRAF/OEM	Updated publisher name and values to correct versions.
7142	Registration	Fixed some awkward wording and generally improved the text.
7341	SIVM	Added more meaningful value labels to the status registers.
7345	Help	Fixed copyright attribution in Test I/O's Help/About.
7575	Install	Fixed warning messages during DNP3 installation.
7152	USB	Fixed reinstall of USB driver after manually deleting it from devices manager and then reinstalling the Tool Kit.
7166	UI	Fixed issue with overlapping window buttons when installing E2-16ISO20M modules.
6523	Test I/O	Fixed issue where E2/EB-16ISOTC modules display large values on disabled channels.
7689	Communications	Fixed issue with communications manager locking communications in some cases.
7707	Configuration Loading	Fixed bug which would reset the IPm after every config load. Now only does it if needed.
7735	Redundancy	Setting redundant IP address of 0.0.0.0 (empty address) now works.
7707	Configuration	Fixed issue which would reset the unit on every config load.

3.50.080

2011-07-26

Fixed Issues:
ID	Subject	Description
7515	SIVM	Fixed bug that resulted in wrong tag names when changing the number of registers.
6935	SIVM	Fixed bug that resulted in empty tag names when adding from context menu.
5775	Calibration	Fixed reset problems when exiting the calibration wizard.

3.50.078

2011-07-01

New Features:
ID	Subject	Description
7239	EtherTRAK-2	Added 2 additional high speed counters to E2-MIX24882 (total of 4). Requires module hardware revision 0102.

Fixed Issues:
ID	Subject	Description
7372	Counter Time Base	Fixed bug that overwrote counter time bases when changing sink/source settings.
7341	SIVM	Fixed minor bug that displayed scaled min/max values for discrete tags.
7322	SIVM	Fixed bug that failed to write [port status] values when I/O Transfers use station number instead of name.
7063	I/O Transfers	I/O Transfers to remote I/O modules were not loaded with the correct IP address.
7197	Auto-Open Feature	If the previous file was removed and the 'Auto-Open Last Project File' was enabled, the Tool Kit would crash.
6945	SIVM	The [port status] section was not written when empty.

3.50.068

2011-05-27

Fixed Issues:
ID	Subject	Description
7105	Port Configuration	After loading firmware, port settings may have failed to load depending on timeout value.

3.50.067

2011-06-02

New Features:
ID	Subject	Description
6660	SIVM	Added SIVM. Requires IPm firmware 4.2.1014 and module daemon.
6636	0-20 mA Analog Outputs	Added 0-20 mA capability to m2m-213 and E2-MIX24882 for analog outputs. Requires IPm firmware 4.2.1014 and E2 firmware 1.11.
6660	SIVM	Added 'Redundancy Role' to redundancy module. This is used by the SIVM.

Fixed Issues:
ID	Subject	Description
6856	Repair Old Install Issues	Upon running the .067 install, previous install and uninstall issues will be repaired. 'Control Panel -> Add or Remove Programs' list is cleaned of dead links.

3.50.056

2011-04-28

Fixed Issues:
ID	Subject	Description
6813	ISaGRAF Options	Fixed bug that failed to store and read hot restart options.
6806	ST-MIX-12884 Counters	Fixed bug that loaded 'Count Up' type only for ST-MIX-12884.
6802	m2m and combination I/O	Fixed bug that left AO ranges at defaults (10V). 4-20 mA range is now loaded.
6790	Uninstall	Fixed problem with slashes in 'I/O' paths which prevented the uninstall from completing properly.
6731	Test I/O	Fixed bug Test I/O that displayed the wrong units for rate counters.
6694	EtherTRAK-2 Web UI	Fixed bug in loading from the Tool Kit which resulted in the Web UI showing incorrect tag names.
6670	EtherTRAK-2	EtherTRAK-2 station names were not enforced to be unique which caused DAO errors.
6656	Remote I/O Links	Fixed bug that failed to remove remote I/O links when the target EtherTRAK-2 was deleted.
6489	Import	EtherTRAK-2 stations were missing from the 'I/O Definitions' import.
5737	Project Files	Fixed bug that crashed the Tool Kit when opening a read-only file.
6741	Install	Fixed missing .customize files for DNP3, AGA, and IEC60870.
6693	EtherTRAK-2	Fixed bug that crashed the Tool Kit when reducing the number of I/O in an EtherTRAK-2 station.
6719	IPm2m	Fixed register shifting bug when the on-board I/O module is not the first in the list.

3.50.045

2011-04-01

New Features:
ID	Subject	Description
6596	RTU	Added capability to monitor ISaGRAF. See the advanced tab of an IPm station configuration.

Fixed Issues:
ID	Subject	Description
6471	IPm2m	Fixed AO register range problem in calibration of IPm2m (-213).
6412	IPm2m	Fixed bug that prevented the high speed counter option for IPm2ms.
6400	Sixlog	Fixed read back bug that resulted in corrupt record content configurations.
6387, 5985	Install	Fixed uninstall warning messages. The Tool Kit is now using the NullSoft (NSIS) installer.
6385	Sixlog	Fixed crash when stations report an error during reading of records.
6384	IPm2m	Fixed bug that resulted in invalid analog tag names/ranges for AO registers.
6368	ST-GT-1210	FTP and Telnet options were incorrectly available in the UI.
6287	Watchdog	Fixed bug that failed to save the freeze/drop settings under watchdog settings.
6174	Remote I/O Links	Fixed bug that only included 8 counters for EtherTRAK-2 MIX modules (corrected to 16).
5983	Install	Fixed bug that requested a disk during repair option. The Tool Kit is now using the NullSoft (NSIS) installer.

3.50.043

2011-03-13

Fixed Issues:
ID	Subject	Description
6365	Uninstall	Fixed uninstall error/warning that .tlb files did not unregister.

3.50.042

2011-03-09

Fixed Issues:
ID	Subject	Description
6368	ST-GT-1210	Fixed FTP and Telnet options bug that allowed them to be selected although not supported.
6399	IPm2m	Fixed bug that shifted analog output tags in project files previous to v3.50.042.
6412	IPm2m	Fixed bug where first channel not selectable as HS counter.
6471	IPm2m	Fixed calibration for m2m analog outputs (range and register number).

3.50.041

2011-02-23

Fixed Issues:
ID	Subject	Description
6123	RTU	Fixed missing sink/source option for mix modules and mini/micro IPms.
6350	IPm2m	Fixed bug that loaded datalog configurations to flash instead of /nvram.
6235	EtherTRAK-2	The 'Specify an IP address' option now uses the specified IP instead of switching to the new IP address.
6174	EtherTRAK-2	Remote I/O links to EtherTRAK-2 mix modules now use 16 counters instead of the 8 previously assigned.

3.50.038

2011-02-07

New Features:
ID	Subject	Description
6164	RTU	Added capability to freeze/drop and manual control with watchdog.

Fixed Issues:
ID	Subject	Description
6094	RTU	Loading with incompatible communications settings caused the Tool Kit to appear to be locked up.
6184	RTU	Removed 256 I/O point limitation from all IPm products.
6166	IPm2m	Watchdog settings were not being displayed correctly.
6225	Datalog Server	Fixed bug that caused serial port transfers to be missed by the server.
6235	EtherTRAK-2	When using 'Specify an IP' option in device setup, the station load operation will now use this IP for the entire process.

3.50.031

2011-01-14

New Features:
ID	Subject	Description
6013	E2-16DORLY	Added the 16 channel relay module to the Tool Kit.

Fixed Issues:
ID	Subject	Description
5480	Datalog Server	First set of records were being discarded.
6025	Find Ethernet Stations	The search was not finding stations on the network.

3.50.028

2010-12-16

New Features:
ID	Subject	Description
5741	Redundancy	Added support for Dual LAN Redundancy. A common IP address can be added to each interface of an ST-IPm.

Fixed Issues:
ID	Subject	Description
5934	EtherTRAK-2	Fixed raw min/max value bug when changing ranges in ISOTC module.
5887	Citect Export	The browse button would not work if the Tool Kit could not find the folder in the registry.
5787	Tool Kit	Fixed memory leak.