Crimson® 2.0

Red Lion's programming software for Panel Meter and PID Controllers, which include the EPAX5, EPAX6, LPAX5, LPAX6, PAX®2A, PAX2D, PAX2S, PX2C, PAXD, PAXDP, PAXH, PAXI, PAXP, PAXS, PAXT, T16, T48, P16, P48, ICM8 and CUB®5 (Software Version 2.0 or higher). In addition, Crimson® 2.0 is used to program and configure the following G3 HMIs: G303 3 inch HMI and G306 6 inch HMI with monochrome display.

Note: Customers should use Crimson 3.0 for other automation products, which include Graphite® and G3 HMIs, Data Station Plus, Modular Controller, ProducTVity Station and E3 I/O™ modules. Official support (changes and/or testing) of these products in Crimson 2.0 will end on December 2016.

Downloads

Crimson 2.0, Build 2.0.0.578

Note: This build requires a PC running Windows XP or later.  Tablet PCs are not supported at this time. Crimson 2 may experience problems running under Windows 10 with touch screen or pen support enabled.  These features are not supported at this time, and will not allow Crimson to start when they are enabled.

Installing Crimson 2.0 software is as easy as 1-2-3:
1. Right-click on the Download link below and select Save As
2. Select a suitable directory on your PC to save the file
3. When the download is complete, run the file to install

Click here to Download (58MB)

Note:
On March 22, 2024, Red Lion units using Crimson® software versions 3.2, 3.1, 3.0 and 2.0 experienced an issue with inaccurate timestamps on data, alarm and event logs. This was caused by an internal software bug, not a cybersecurity event. A fix for this issue is available. Please contact Tech Support for more information via the methods listed below.

support@redlion.net
+1 (877) 432-9908
Red Lion Support

Vista Users: In addition to downloading and installing the above file, download and unzip this file. Copy the Device folder it creates into this folder:

C:\Program Files\Red Lion Controls\Crimson 2.0

Click here to Download (6KB)